The chemical solution in the pump tube is captured between the rollers as they rotate and compress the tube. The universal bracket as shown above and steel bracket are available for a small additional cost. Replace valve seals, spacer, and piston assembly. Donald Matt, Western Sales Manager — Donald has worked in the water treatment industry for 21 years gaining valuable knowledge by working in manufacturing, commercial engineering and customer service before moving to sales. At the stated service flow rates, the pressure drop through these devices will not exceed 15 psig. Operation Manual Metermatic Water Softener Operation Manual Page 6 of this manual contains important maintenance procedures for the continued proper operation of your unit.

Carefully flush all parts including the screen. Defective position sensor PCB. You may notice new sounds as your water softener operates. NovoSoft Series water softeners combine not only great features for the homeowner but also the plumber installing the equipment. Press MENU to exit programming mode. This should always be followed up by allowing the unit to use up any remaining salt and then thoroughly cleaning out the brine tank. Check for proper flow rate.

The programmed settings are stored in a non-volatile memory and sovtener not be lost during a power failure. Offer your customers more for less. Sanitizing is recommended by the Water Quality Association for disinfecting.

The advanced formula contains more than five chemicals that are formulated to clean, restore and maintain novowoft life of water softeners.

Familiar piston, seal and spacer technology and unique features such as time saving quick connect fittings on the bypass and brine line and integrated meter in bypass were designed with the Plumber in mind.

Water Treatment Products for the Plumbing Professional |

You can use your water related fixtures and appliances as the water supply is bypassing the softener. With over 80 years experience we have manufactured your new water softener from quality corrosion.

The surface should be clean and level. Got it, continue to print. During regeneration, hard water is automatically bypassed for use in the household. Do not add salt to the brine tank at this time.


Bottle Res Care – 1 qt. Check for proper flow rate. Read all instructions carefully before. General Installation Figure 6. Start-up Instructions 9 Slowly turn on the main water supply. Reassemble using the reverse procedure.

With proper installation and a little routine maintenance your system will be providing filtered water for many More information.

Do not use this system on water that is microbiologically unsafe or of unknown quality without adequate disinfection before. Never subject your softener to freezing or to temperatures above F. This should always be followed up by allowing the unit to use up any remaining salt and then thoroughly cleaning out the brine tank.

NOVO NVO465-100 Operating Manual

This value is the softensr of people living in the home. Fill in pertinent information on page 2 for future reference. All our products have been engineered to meet serues exceed industry performance standards.

Thank you for your purchase of a new Water Softener More information. Start display at page:. Bottle Rust Out – 50 lb. Refer to Level Two User Programming for description of each mode. The filter bed is cleaned, then a measured amount of potassium permanganate is drawn from the feeder through the filter bed, recharging it with oxygen. John works from our Kitchener office.

If power fails while the unit is in regeneration, the valve will finish regeneration from the point it is at once power is restored. Do not use abrasive cleaners, ammonia or solvents. The UV lamp can be changed without interrupting the water flow.

Automatic Bypass The regeneration cycle lasts approximately 70 minutes, after which soft water service will be restored. Close tolerances within the pump head and motor, result in lower amp draw; lower operating temperatures; smoother running; longer life; lower maintenance; and greater efficiencies. Item 40 Description Neutra 7 – 4 lb. This value is the interval days between regenerations.


Failure to follow any attached instructions or operating parameter may lead to the product s More information. Seven Year Complete Parts Guarantee Novo Water Conditioning Products will replace any part which fails within 84 months from date of manufacture, as indicated by the serial number, provided the failure is due to a defect in material or workmanship.

Remove the injector throat the same way. Regular use of Res Care will restore the softener back to peak efficiency and maintain the life of the unit.

The SXT valve has a 5′ cord with a special low voltage transformer. To resume soft water service, open bypass valve by rotating the knobs counterclockwise. His strong technical knowledge has allowed him to excel not only as a Customer Service Manager but also as a key trainer at our customer training events. The only exception shall be when proof of purchase or installation is provided and then the warranty period shall be from the date thereof.

Thank you for your purchase of a new Water. Ban T is an environmentally-friendly cleaning agent that removes hard water deposits and moderate iron watre from household fixtures. Carefully flush all parts including the screen.

NovoSoft 465 Series Water Softener Operation Manual

Setting Water Hardness 1. In this mode the length of time for backwash and rinse along with the frequency are set while the valve is in vacation mode.

With proper installation and a little routine maintenance your system will be providing filtered water for many. General Installation Control Operation During A Power Failure In the event of a power failure, the valve will keep track of the time and day for 48 hours.